Helpful Appliance Tips
Generally older appliances are more durable and long-lasting than the newer product being made today. being made today. Modern models have wonderful features, but do need more maintenance and repair than their older counterparts. It is wise to get an estimate for repair before replacing. The general rule of thumb is to not exceed 35% of the total replacement cost = product, tax, delivery, extraction of old appliance, etc.
Don’t ignore broken oven doors. Ovens are not furnaces, and are not connected to a chimney to vent dangerous combustion gases outside. A broken door will not allow the oven thermostat to acclimate or shut off, so monoxide continues to be produced from the
continued combustion rather than stop. This broken door seems minor, but is actually potentially deadly.
Absolutely! Virtually all manufacturers recommend it be done once a year or more as noted in the owner’s “Care and Use Manual.” It saves electricity, minimizes bio concerns, and ultimately helps extend the life and productivity of the refrigerator. We have a regularly scheduled service program for our customers to enroll in it is that important!
There could be a malfunction inside the dryer preventing the proper heat from being attained so the dryer should be inspected. Many times, however, the problem is as simple as having the dryer vent cleaned properly and professionally. As well as being inconvenient, this build-up of lint is a potential fire hazard, and should not be taken lightly.
No! There is a safety temperature control that governs when it is safe to open the door. Allow some time to pass. It should open up after it cools down. If, after several hours, it still won’t open, call for service.
No. If gas burner valves start “grinding,” turning hard, or breaking the knobs, we can often repair the valves before they require total replacement – if caught in time.
Yes, unfortunately it can. That is why it is important to understand the proper temperature activation and lifetime of the detergent you use. Check the soap manufacturer recommendations on the back of the box. Typically temperature activation is around 72 degrees F, and the lifetime of the soap while sudsing is 15-20 minutes. Temperature of the water is important and should not be ignored! Cold temperature refers to about 70 degrees F, not 40 degrees F! So in the winter in the Chicago area, the cold water supply out of Lake Michigan can fall below activation temperature resulting in no cleaning action at all! Medium temperature may be needed in the winter in your area. Also, after laundry is completed, many experts recommend that you run an empty bleach cycle to kill the remaining potential bacteria, and an extra rinse cycle to get rid of the bleach fully.
Unplug the appliance or turn off the power source immediately at the fuse or circuit breaker. Then call for service. It is also possible that there was a spill, and that the components are wet. The clicking may stop when they dry out.
Yes, according to Linda Cobb, the Queen of Clean, place vanilla extract in a bowl, and microwave for 30 seconds. Leave the door closed for twelve hours. Remove the vanilla and wipe down the inside of microwave. The smell of popcorn should be gone.
To remove rust from the inside of a dishwasher, fill both detergent cups with Tang˙ Breakfast Drink and run through a normal cycle. When doing this, do not put detergent or dishes in the dishwasher. If rust is bad, several treatments may be required.
Yes, do not grind bones or celery in your disposal!